People Reviews
If your marine toilet has a “Y” valve, what must you do in a No Discharge Zone?
A. so you don’t discharge
Marine Y Valve
the valve should be safety wired in the direction of only allowing it to go to tank.Let the coast gaurd catch it in any other direction and you will get fine if they want to. most of the time you will get warning or may have to safety wire it before they leave.
Source(s): 28 years merc and volvo certified tech
Perhaps you should go through the Crew material before taking the quiz?!?
Maybe you should have studied!
Think about it….. the answer is obvious.
What our team says
If your marine toilet has a “Y” valve, what must you do in a No Discharg
If you are visiting a marine park, be sure to familiarize yourself with the “No Discharge Zone” signs. This is an area where marine life is protected and human waste is not allowed to enter the water. If you are unfortunate enough to find yourself in a No Discharge Zone and your marine toilet has a “Y” valve, here are some tips for safely exiting the zone: 1. Close the valve completely, then wait five minutes for it to flush. 2. Turn the handle on the side of the toilet all the way to left (counter-clockwise). This will fill up the tank with fresh water and create a suction that will pull waste down into the sewage system. 3. Wait two minutes, then turn the handle back to its original position and flush.
What is a No Discharge Zone?
If your marine toilet has a “Y” valve, what must you do in a No Discharge Zone?
A No Discharge Zone is an area around a marine toilet where the discharge overboard of sewage or effluent is not allowed. The zone surrounds the toilet, extending out to a distance of at least 25 feet from the toilet and a distance of 200 feet from any point where the surface water meets the sea.
How to determine if your marine toilet has a “Y” valve?
If your marine toilet has a “Y” valve, you must use the valve to discharge your waste into the ocean.
This is because the “Y” valve prevents sewage and other contaminants from entering the ocean.
How to open a “Y” valve if necessary
If your marine toilet has a “Y” valve, what must you do in a No Discharge Zone?
If your marine toilet has a “Y” valve, and you are in a No Discharge Zone, you will need to open the “Y” valve. This will allow the waste to flow out of the toilet, and then you can flush it.
How to clear the “Y” valve in a No Discharge Zone
If your marine toilet has a “Y” valve, what must you do in a No Discharge Zone?
To clear the “Y” valve in a No Discharge Zone, first turn off the power to the toilet. Then use a plunger to suction onto and remove any clogged material from the valve. Finally, open the valve and allow the water to flow out.
Conclusion
If your marine toilet has a “Y” valve, you must close the “Y” valve before flushing. This is in accordance with MCA Section 6802 which states: (a) A person may operate a marine sanitation device that discharges into the open ocean only if— (1) the device bears an identification tag or other marking indicating that it meets the requirements of this chapter and paragraphs (b), (c), and (d); and (2) during any part of its operation within 20 nautical miles of shoreline, including during startup and shutdown, the discharge from the device does not create a noxious or intolerableenvironmental effect.
e Zone?
- Where is oscdimg.exe - April 14, 2024
- Carriage return in excel formula - April 14, 2024
- Email Folders Disappeared - April 14, 2024
