How do you clean tarnished Brighton jewelry?

People Reviews

The chain is tarnished badly. Website says to buff with a soft cloth – this doesn’t help at all.

Do what the cleaning mavens suggest. Line a bowl with aluminum foil. Then fill it with warm water, and 2 teaspoons of baking soda. Soak the necklace. It should get rid of all tarnish in no time at all. This works by electrolytic action.

From a quick search, it would seem that Brighton Jewelry is sterling silver? Sterling tarnishes fairly quickly.

To clean it, I suggest a polishing cloth. You can find these at jewelry supply stores, hobby stores, and sometimes jewelers carry them. I have included a link to a wholesale supplier that I use.
http://www.sfjssantafe.com/itemlist.php?
ItemSet=Polishing+Cloths+%26+Gloves&DepId=tools

You will see that there are several types. Any polishing cloth for silver/gold will work beautifully. * You do not need the rouge cloth, so don’t purchase rouge by mistake.

You can also find silver polishing cloths on Ebay.

I strongly advise against using tarn-x, or other harsh cleaners. They can damage certain findings, and or gem stones that may be part of your Brighton jewelry.

Also, beware of bottled jewelry cleaners. Some are wonderful. Others are quite harsh, and may damage your jewelry. Best bet, if you purchase a liquid jewelry cleaner is to make sure that it specifies gentle cleansing.

‘Course, I will reiterate … silver chain … use a silver polishing cloth. It’s super easy to use (just cover your chain, and pull through until you no longer see black on the cloth), and it’ll only cost you about $5. (U.S.), and you’ll be able to use it many, many times. Plus, the polishing cloth will return your chain to
like- new condition!

Good luck!

Added: Good sleuthing Shrikuma. Of particular interest is:

” …. and then lavishly dipped in pure silver. Since silver has a natural tendency to tarnish (oxidize) and scratch, we add a protective layer of lacquer to assist in retarding this typical occurrence.”

Gina, this is important because Shirokuma is right about
pure/ fine (.999) silver oxidizing at such a slow pace as to be virturally tarnish proof. If your chain is a base metal, with electroplating or dipped .999 pure silver layering, and it is badly tarnished, then the silver has worn off, and no amount of cleaning will ever return your chain to it’s previous condition.

Also Read :   what is the name of the song and artist of the honduran punta song that goes “Ay 123”?

Look for a ” .925 ” mark on the chain – probably on the clasp. If it doesn’t say .925 then I wouldn’t get my hopes up about returning it to it’s former glory.

Purchasing a polishing cloth and giving your necklace an attempt at cleaning couldn’t hurt. If it’s layered, and beyond restoration, then you’ll still have the polishing cloth for your other jewelry. And, if it is .925, then it’ll clean up beautifully.

Brighton Lanyard

I’m following up on Gemlover’s answer. The Brighton Jewelry product line gives no indication that it is made of silver, only silver in color.

I found this on their website:

“”Brighton rings are sterling silver. Other jewelry items and silver ornaments are cast in solid brass or zinc, and then lavishly dipped in pure silver. Since silver has a natural tendency to tarnish (oxidize) and scratch, we add a protective layer of lacquer to assist in retarding this typical occurrence.””

Look for a micro stamp or tag that reads “925”. this would indicate sterling silver, a mix of 92.5% silver and 7.5% alloys (usually copper). If you have any real silver and not just a flash coating of silver, then you have a chance of removing the tarnish without the risk of destroying the jewelry.

I use a Sunshine cloth from RioGrande (www.riogrande.com) for cleaning up jewelry. It’s fast, reuseable, and doesn’t leave scratches like other cloths I have tried. Your local independent jeweler probably has them on the counter.

If your Brighton jewelry is base metal, i.e. the cast zinc dipped in pure silver schlock described above, then the best advice I have is throw it in the trash.

Pure silver doesn’t tarnish! I can put a torch flame to pure silver and it will clean it. The lacquer coating will not prevent oxidation for any long period of time, but it will keep any scratches from cutting through the pure silver and into the cast metal, where the real oxidation would begin.

Source(s): Orchid (www.ganoksin.com)

Dip in ketchup for a few minutes. Rinse in warm water, dry gently with cotton towel. If that doesn’t clean the tarnish, take to place of purchase and have them send back to Brighton for tarnish removal. DO NOT store your Brighton jewelry in any type of plastic.

Also Read :   What does the S stand for in P R N D S L?

Answer 6

This Site Might Help You.

RE:
How do you clean tarnished Brighton jewelry?
The chain is tarnished badly. Website says to buff with a soft cloth – this doesn’t help at all.

Answer 7

Brighton Necklaces

I was able to clean a badly tarnished Brighten chain in warm water with a soft toothbrush and baking soda. I used toothpaste first with just a little luck, but switched to baking soda because the toothpaste was taking too long. I laid the chain on a wash cloth, wet the toothbrush with warm water, dipped it into the baking soda and then scrubbed away. It took a few minutes, but the chain now looks new.

1

Brighton has some really cute pieces but it is not sterling silver. They say””Brighton rings are sterling silver but the Other jewelry items and silver ornaments are cast in solid brass or zinc, and then lavishly dipped in pure silver. Since silver has a natural tendency to tarnish (oxidize) and scratch, we add a protective layer of lacquer to assist in retarding this typical occurrence.”
Make a note that fine silver does not tarnish. What I think they do is plate it with sterling silver and because that isn’t good enough to treat as real sterling silver they then coat it with a lacquer so to protect the jewelry from rubbing off the silver. I cant tell you how many people I know think Brighton is sterling silver. If you want to check out some real sterling silver and fine silver pieces come to aprilshelley.com

What our team says

How do you clean tarnished Brighton jewelry?

Brighton jewelry is known for its bright colors, antique designs, and detailed craftsmanship. However, over time tarnish can build up on jewelry, making it less shiny and more difficult to clean. In this article, we’ll show you how to clean Brighton jewelry using a few easy steps.

What is tarnish?

Tarnish is a mineral coating that forms on metal when it is exposed to air, moisture, and other external factors. It can make your jewelry look dirty and aged. There are many ways to clean tarnished jewelry, but the best way to determine what will work for your specific piece is to try a few methods and see which one works best.

Also Read :   Which of the following entries records the payment of insurance for the current month?

Some tips for cleaning tarnished jewelry include using a polishing cloth or a silver polish. You can also use a silver cleaner or a polishing pad. Be sure to rinse the jewelry thoroughly after cleaning it with either of these methods to avoid adding additional tarnish. You can also use a silver polish specifically designed for cleaning tarnished jewelry.

What causes tarnish?

Brighton jewelry may look beautiful on the surface, but over time it can start to tarnish. Tarnish is caused by a mixture of chemicals and oils that react together and create a black or brown coating. The most common sources of tarnish are sweat, oil, and other liquids that seep into the metal.

To clean Brighton jewelry, you’ll first need to remove any visible dirt or dust. Next, use a mild soap solution to clean the surfaces of the jewelry thoroughly. Make sure to rinse everything off completely before applying a polish or protection agent.

How to clean tarnished Brighton jewelry?

If your Brighton jewelry has tarnished over time, there are a few steps you can take to clean it and make it look its best again.

1. Start by using a polishing cloth to buff the tarnish away.
2. Use a cleaner with a mild abrasive action to remove any remaining tarnish.
3. Allow the jewelry to air dry completely before wearing.

Conclusion

If you have Brighton jewelry that has tarnished over time, it can be a real pain to clean. You might be tempted to just throw it away, but that would probably be a mistake. Here are four simple steps you can take to Clean Tarnished Brighton Jewelry: ###

Leave a Comment