The hosted network couldn’t be started: The group or resource is not in the correct state to perform the requested operation.

If you are encountering the error message “The hosted network couldn’t be started: The group or resource is not in the correct state to perform the requested operation” on your Windows device, it means that the hosted network feature is not functioning properly. This feature allows you to create a virtual wireless network on your computer that other devices can connect to.

There are several reasons why this error message may appear, including outdated drivers, incorrect network settings, or issues with the network adapter. Here are some steps you can take to fix the problem:

1. Update your network adapter drivers: Go to the Device Manager and locate your network adapter. Right-click on it and select “Update driver.” Follow the prompts to download and install the latest drivers.

2. Check your network settings: Make sure that your network settings are configured correctly. Go to the Control Panel and select “Network and Sharing Center.” Click on “Change adapter settings” and ensure that your network adapter is enabled and connected to the internet.

3. Restart the WLAN AutoConfig service: Press the Windows key + R to open the Run dialog box. Type “services.msc” and press Enter. Locate the WLAN AutoConfig service, right-click on it, and select “Restart.”

4. Reset your network settings: Open the Command Prompt as an administrator and type the following commands, pressing Enter after each one:

netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

5. Disable and re-enable the network adapter: Go to the Control Panel and select “Network and Sharing Center.” Click on “Change adapter settings” and right-click on your network adapter. Select “Disable” and wait a few seconds, then right-click on it again and select “Enable.”

By following these steps, you should be able to resolve the “The hosted network couldn’t be started” error message and create a virtual wireless network on your Windows device. If the problem persists, you may need to contact your device manufacturer or a professional technician for further assistance.

Conclusion

We hope that the steps provided were helpful in resolving the “The hosted network couldn’t be started” error message on your Windows device. If you have any further issues or concerns, don’t hesitate to reach out for additional assistance.

• Author
• Recent Posts

Answer Prime

This is the collective voice of the talented editorial team at Answerprime.com. Committed to delivering high-quality content, this account represents the collaborative efforts of knowledgeable experts. With a passion for research and a dedication to accuracy, Answerprime brings you insightful articles across various subjects. Explore a diverse range of expertise and perspectives curated by the editorial team through the lens of Answerprime.

Latest posts by Answer Prime (see all)

• Windows Shell Common DII – What is this? - December 26, 2024
• How to activate Office Professional 2013 without personal email/account? - December 26, 2024
• Trying to run slui 4 but nothing pops up - December 26, 2024