If you are seeing the message “start PXE over IPv6” on your Windows computer, it means that your computer is trying to boot from a network device instead of the hard drive. This can happen if the boot order in your BIOS is set to prioritize network booting over local booting.
To fix this issue, you will need to access your computer’s BIOS settings and change the boot order. Here’s how:
1. Restart your computer and press the key that appears on the screen to enter the BIOS setup (usually F2, F10, or Del).
2. Look for the “Boot” or “Boot Order” section in the BIOS settings.
3. Make sure that the hard drive is listed as the first boot device. If it’s not, use the arrow keys to move it to the top of the list.
4. Save your changes and exit the BIOS setup.
5. Restart your computer and see if the “start PXE over IPv6” message still appears.
If the message persists, it may indicate a problem with your hard drive or operating system. In this case, you may need to seek further assistance from a professional technician or IT support team.
In summary, the “start PXE over IPv6” message on a Windows computer can be resolved by adjusting the boot order in the BIOS settings. By prioritizing the hard drive as the first boot device, you can ensure that your computer boots from the local drive instead of attempting to boot from a network device.Conclusion We hope that the steps provided were helpful in resolving the “start PXE over IPv6” issue on your Windows computer. Remember to always prioritize the hard drive as the first boot device in your BIOS settings to avoid similar issues in the future. If you encounter any further problems, don’t hesitate to seek assistance from a professional technician or IT support team.